GUI reference
R&S
®
ZND
435
User Manual 1173.9557.02 ─ 61
Note:
A label "Cal Off" appears behind the trace list if the system error correction is
switched off; see also
Chapter 4.5.4, "Calibration labels"
status of each channel and trace appears in the setup information ("Setup" > "Info..." >
"Setup").
Remote command:
[SENSe<Ch>:]CORRection[:STATe]
Scalar Power Cal – All Power Cals On / All Power Cals Off
Activates or deactivates all scalar power calibrations in the active channel. "All Power
Cals On" is only available if a valid power calibration is available for the active channel,
but not active; see "Channel State" in
Chapter 5.11.4.3, "Calibration Manager dialog"
Note:
A label "PCal Off" appears behind the trace list of a wave quantity or a ratio if the
power calibration is switched off; see also
Chapter 4.5.6.3, "Power calibration labels"
on page 178. The calibration status of each channel and trace appears in the setup
information (see
Remote command:
Active Power Cals...
Opens the
Manage Cals – Recall Last Cal Set
Loads and activates the recall set for which the last calibration was performed. If the
last calibrated setup is already active, nothing is changed. The calibrated setups are
automatically stored in the
C:\Users\Public\Documents\Rohde-Schwarz\Vna\Calibration\
RecallSets
directory. A message box pops up if the directory is empty, e.g. because
no calibration was performed yet.
Remote command:
n/a
Manage Cals – Cal Manager...
Opens the
Manage Cals – Remove all Cal Data
This button cleans the active channel's existing calibration data and also removes links
to the calibration pool.
Remote command:
Manage Cals – Join Calibration...
Opens the
Cal softtool
www.allice.de
Allice Messtechnik GmbH