Agilent Technologies Infiniium 90000 Q-Series, Programmer'S Manual

Page: 450 / 1186

450 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
24
Mask Test Commands
:MTESt:FOLDing
(Clock Recovery software only)
Command
:MTESt:FOLDing {{ON | 1} | {OFF | 0}}
The :MTESt:FOLDing command enables (ON) or disables (OFF) the display
of the real time eye. When enabled, an eye diagram of the data will be
generated syperimposed on the recovered clock. Refer to the
:MEASure:CLOCk commands for clock recovery.
Example
This example enables the display of the real time eye.
myScope.WriteString ":MTEST:FOLDING ON"
Query
:MTESt:FOLDing?
The :MTESt:FOLDing? query returns the current state of clock recovery
folding.
Returned Format
[:MTESt:FOLDing] {1 | 0} <NL>
Example
myScope.WriteString ":MTEST:FOLDING?"
varValue = myScope.ReadNumber
Debug.Print FormatNumber(varValue, 0)
See Also • ":MEASure:CLOCk" on page 495
• ":MEASure:CLOCk:METHod" on page 496
• ":MEASure:CLOCk:METHod:ALIGn" on page 498
• ":MEASure:CLOCk:METHod:DEEMphasis" on page 499
• ":MEASure:CLOCk:METHod:EDGE" on page 500
• ":MEASure:CLOCk:METHod:JTF" on page 502
• ":MEASure:CLOCk:METHod:OJTF" on page 504
N O T E
This command is only available when the E2688A Clock Recovery Software is installed.