Agilent Technologies Infiniium 90000 Q-Series, Programmer'S Manual

Page: 901 / 1186

Trigger Commands
33
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 901
:TRIGger:STATe:CLOCk
Command
:TRIGger:STATe[{1 | 2}]:CLOCk {CHANnel<N> | DIGital<M>}
This command selects the source for the clock waveform in the State
Trigger Mode.
The optional [{1 | 2}] parameter sets whether the trigger mode goes with
the TERM1 or TERM2 state if sequential triggering is being used.
<N>
An integer, 1- 4.
<M> An integer, 0- 15. Digital channels are available on mixed- signal
oscilloscopes.
Query
:TRIGger:STATe:CLOCk?
The query returns the currently selected clock source.
Returned Format
[:TRIGger:STATe:CLOCk] {CHANnel<N> | DIGital<M>}<NL>