Agilent Technologies Infiniium 90000 Q-Series, Programmer'S Manual

Page: 177 / 1186

Bus Commands
10
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 177
:BUS<N>:BIT<M>
Command
:BUS<N>:BIT<M> {ON | OFF | 1 | 0}
The :BUS<N>:BIT<M> command includes or excludes the selected bit as
part of the definition for the selected bus. If the parameter is a 1 (ON)
then the bit is included in the definition. If the parameter is a 0 (OFF)
then the bit is excluded from the definition. The digital subsystem must be
enabled for this command will work. See ENABle command in the root
subsystem.
<M>
An integer, 0- 15.
<N> An integer, 1- 4.
Example
This example includes bit 1 as part of the bus 1 definition.
myScope.WriteString ":ENABLE DIGITAL"
myScope.WriteString ":BUS1:BIT1 ON"
Query
:BUS<N>:BIT<M>?
The :BUS<N>:BIT<M>? query returns the value indicating whether the
specified bit is included or excluded from the specified bus definition.
Returned Format
[:BUS<N>:BIT<M>] {1 | 0}<NL>
N O T E
The BUS commands only apply to the MSO oscilloscopes.