Agilent Technologies Infiniium 90000 Q-Series, Programmer'S Manual

Page: 667 / 1186

Measure Commands
25
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 667
:MEASure:TVOLt
Command
:MEASure:TVOLt <voltage>,[<slope>]<occurrence> [,<source>]
The :MEASure:TVOLt command measures the time interval between the
trigger event and the defined voltage level and transition. Sources are
specified with the :MEASure:SOURce command or with the optional
parameter following the :MEASure:TVOLt command.
The TEDGe command can be used to get the time of edges.
Query
:MEASure:TVOLt? <voltage>,<slope><occurrence> [,<source>]
The :MEASure:TVOLt? query returns the time interval between the trigger
event and the specified voltage level and transition.
<voltage>
Voltage level at which time will be measured.
<slope> The direction of the waveform change when the specified voltage is
crossed - rising (+) or falling (- ). If no +/- sign is present, + is assumed.
<occurrence> The number of the crossing to be reported (if one, the first crossing is
reported; if two, the second crossing is reported, etc.). The desired
crossing must be present on the display. Occurrences are counted with 1
being the first occurrence from the left of the display, and a maximum
value of 65534.
<source>
{CHANnel<N> | FUNCtion<F> | WMEMory<N> | CLOCk | MTRend |
MSPectrum | EQUalized}
MTRend and MSPectrum sources are only available if the oscilloscope has
the EZJIT option installed and the feature is enabled.
The CLOCk source is only available if the oscilloscope has the High Speed
Serial option installed and the feature is enabled.
The EQUalized source is only available if the oscilloscope has the High
Speed Serial option and the Serial Data Equalization option installed and
the features are enabled. This command uses the Feed- Forward Equalized
(FFE) signal as the source.
<N>
CHANnel<N> is an integer, 1- 4.
WMEMory<N> is an integer, 1- 4.
<F>
FUNCtion<F> is an integer, 1- 16.
Returned Format
[:MEASure:TVOLt] <time>[,<result_state>]<NL>
<time>
The time interval between the trigger event and the specified voltage level
and transition.