Agilent Technologies Infiniium 90000 Q-Series, Programmer'S Manual

Page: 432 / 1186

432 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
24
Mask Test Commands
:MTESt:AlignFIT
Command
:MTESt:AlignFIT {EYEAMI | EYECMI | EYENRZ | FANWidth | FAPeriod
| FAPWidth | FYNWidth | FYPWidth | NONE | NWIDth
| PWIDth | TMAX | TMIN}
The :MTESt:AlignFIT command specifies the alignment type for aligning a
mask to a waveform. The pulse mask standard has rules that determine
which controls the oscilloscope can adjust or change during the alignment
process. In the following table of alignment types, an X in a column
indicates that the control can be adjusted.
Example This example specifies the alignment type to be EYEAMI.
myScope.WriteString ":MTEST:ALIGNFIT EYEAMI"
Query
:MTESt:AlignFIT?
The :MTEST:AlignFIT? query returns the alignment type used for the mask.
Table 23 Available Alignment Types
Alignment
Type Waveform
Type Horizontal
Position 0 Level
Voltage 1 Level
Voltage Vertical
Offset Invert
Waveform
EYEAMI AMI X X X
EYECMI CMI X X X
EYENRZ NRZ X X X
FANWidth Negative X X X
FAPeriod Full Period X X
FAPWidth Positive X X X
FYNWidth Negative X X X
FYPWidth Positive X X X
NONE Automask
NWIDth Negative
Pulse X X X X
PWIDth Positive
Pulse X X X X
TMAX Positive
Sine Pulse X X X X
TMIN Negative
Sine Pulse X X X X