Agilent Technologies Infiniium 90000 Q-Series, Programmer'S Manual

Page: 614 / 1186

614 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
25
Measure Commands
Table 24 Result States
Code Description
0 Result correct. No problem found.
1 Result questionable but could be measured.
2 Result less than or equal to value returned.
3 Result greater than or equal to value returned.
4 Result returned is invalid.
5 Result invalid. Required edge not found.
6 Result invalid. Max not found.
7 Result invalid. Min not found.
8 Result invalid. Requested time not found.
9 Result invalid. Requested voltage not found.
10 Result invalid. Top and base are equal.
11 Result invalid. Measurement zone too small.
12 Result invalid. Lower threshold not on waveform.
13 Result invalid. Upper threshold not on waveform.
14 Result invalid. Upper and lower thresholds are too close.
15 Result invalid. Top not on waveform.
16 Result invalid. Base not on waveform.
17 Result invalid. Completion criteria not reached.
18 Result invalid. Measurement invalid for this type of waveform.
19 Result invalid. waveform is not displayed.
20 Result invalid. Waveform is clipped high.
21 Result invalid. Waveform is clipped low.
22 Result invalid. Waveform is clipped high and low.
23 Result invalid. Data contains all holes.
24 Result invalid. No data on screen.
29 Result invalid. FFT peak not found.
30 Result invalid. Eye pattern not found.
31 Result invalid. No NRZ eye pattern found.
33 Result invalid. There is more than one source on creating the database.
35 Signal may be too small to evaluate.