Agilent Technologies Infiniium 90000 Q-Series, Programmer'S Manual

Page: 249 / 1186

Common Commands
13
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 249
See Also
Refer to Chapter 6 , “Status Reporting,” starting on page 103 for a
complete discussion of status.
4 16 EXE - Execution Error Indicates whether a parameter
was out of range, or was
inconsistent with the current
settings.
3 8 DDE - Device Dependent Error Indicates whether the device was
unable to complete an operation
for device-dependent reasons.
2 4 QYE - Query Error Indicates if the protocol for queries
has been violated.
1 2 RQC - Request Control Indicates whether the device is
requesting control.
0 1 OPC - Operation Complete Indicates whether the device has
completed all pending operations.
Table 17 Standard Event Status Enable Register Bits (continued)
Bit Weight Enables Definition