Agilent Technologies Infiniium 90000 Q-Series, Programmer'S Manual

Page: 734 / 1186

734 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
27
Root Level Commands
:STORe:WAVeform
Command
:STORe:WAVeform {{CHANnel<N> | FUNCtion<F> | WMEMory<N> | MTRend
| MSPectrum},{WMEMory<N>}}
MTRend and MSPectrum sources are only available if the oscilloscope has
the EZJIT option installed and the feature is enabled.
<N> An integer, 1- 4.
<F>
An integer, 1- 16.
The :STORe:WAVeform command copies a channel, function, stored
waveform, measurement trend, or measurement spectrum to a waveform
memory. The parameter preceding the comma specifies the source and can
be any channel, function, or waveform memory. The parameter following
the comma is the destination, and can be any waveform memory.
The :WAVeform:VIEW command determines the view of the data being
stored.
Example
This example copies channel 1 to waveform memory 3.
myScope.WriteString ":STORE:WAVEFORM CHANNEL1,WMEMORY3"