Agilent Technologies Infiniium 90000 Q-Series, Programmer'S Manual

Page: 181 / 1186

Bus Commands
10
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 181
:BUS<N>:CLOCk:SLOPe
Command
:BUS<N>:CLOCk:SLOPe {RISing | FALLing | EITHer}
The :BUS<N>:CLOCk:SLOPe command sets the clock edge used for
decoding the bus values.
<O>
An integer, 1- 4.
Example This example sets the clock edge to falling for bus 1.
myScope.WriteString ":ENABLE DIGITAL"
myScope.WriteString ":BUS1:CLOCk:SLOPE FALLING"
Query
:BUS<N>:CLOCK:SLOPe?
The :BUS<N>:CLOCk:SLOPe query returns the clock edge being used for
the specified bus.
Returned Format
[:BUS<N>:CLOCk:SLOPe] {RISing | FALLing | EITHer}<NL>
N O T E
The BUS commands only apply to the MSO oscilloscopes.