Agilent Technologies Infiniium 90000 Q-Series, Programmer'S Manual

Page: 1154 / 1186

1154 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
39
Reference
YDispRange The number of Y display range columns (n) depends on the number of
sources being store. The Y display range is the Y- axis duration of the
waveform which is displayed. For voltage waveforms, it is the amount of
voltage across the display. If the value is zero then no data has been
acquired.
YDispOrg
The number of Y display origin columns (n) depends on the number of
sources being store. The Y- display origin is the Y- axis value at the center
of the display. For voltage waveforms, it is the voltage at the center of the
display. If the value is zero then no data has been acquired.
YInc
The number of Y increment columns (n) depends on the number of
sources being store. The Y increment is the duration between Y- axis levels.
For voltage waveforms, it is the voltage corresponding to one level. If the
value is zero then no data has been acquired.
YOrg
The number of Y origin columns (n) depends on the number of sources
being store. The Y origin is the Y- axis value at level zero. For voltage
waveforms, it is the voltage at level zero. If the value is zero then no data
has been acquired.
YUnits
The number of Y units columns (n) depends on the number of sources
being stored. The Y units is the unit of measure of each voltage value of
the acquired waveform.
Frame A string containing the model number and serial number of the scope in
the format of MODEL#:SERIAL#.
Date The date when the waveform was acquired. The default value is 27 DEC
1996.
Time The time when the waveform was acquired. The default value is
01:00:00:00.
Max bandwidth An estimation of the maximum bandwidth of the waveform. The default
value is 0.
Min bandwidth An estimation of the minimum bandwidth of the waveform. The default
value is 0.
Time Tags The Time Tags only occur when the data was acquired using the
Segmented acquisition mode with time tags enabled and the file format is
YValues. The number of columns depends on the number of Segments
being saved.
Data The data values follow this header entry.