A&D RA3100 Omniace, Instruction Manual

Page: 18 / 176

1.Name and Function of Each Block - 1.2.Display Block
18 1WMPD4004444
1.2. Display Block
This product has a TFT color LCD display with touch panel.
The LCD displays the waveform monitor and setup keys, and users can configure setup by directly
touching the panel.
Waveform area Side menu
Scroll the waveform
Tap the
screen to set
Pinch in (reduce)/pinch out (expand) the waveform
Control bar
Waveform area: You can observe the state of the input signal and play back the recorded data on
the waveform monitor. Pinch in/out to enlarge or reduce the waveform or scroll the
waveform.
Side menu: Used to switch the display screen, configure the various input modules, configure
the recording conditions, configure recording, set triggers, and display digital data,
etc.
Control bar: The control bar provides a menu for the functions frequently used with the
waveform monitor, such as the basic control of sampling, etc., thumbnail display,
cursor display, and pen recorder control.
NOTE
The pen recorder control function enables waveform recording to a printer using operations that
simulate a conventional pen recorder.
This product uses an electrostatic capacitive touch panel. The touch screen may not react if you are
wearing gloves.