A&D RA3100 Omniace, Instruction Manual

Page: 135 / 176

10. 10Appendix - 10.5. Setup Information after Executing Initialization
1WMPD4004444 135
10.5. Setup Information after Executing Initialization
The setting values after executing initialization ("8.3.1. Maintenance ") are indicated below.
<Initialization>
Item Initialization process
1. Waveform
monitor
Recording device: PRINTER
CH: All channels disabled
Sampling speed: 1 s/div
2. Input module
Common to all channels
Meas.: OFF
Analog input module
Meas. range: Minimum
filter: OFF
Disp. pos.: 50%
Disp. range: 100%
Disp. min: -Range
Disp. max: +Range
Logic module
input signal: voltage
V-Threshold: 1.4 V
Disp. pos.: 50%
Disp. range: 100%
3. Trigger
Trigger mode: OFF
By trigger source
Trigger channel: OFF
Analog input module
Detection: UP
Threshold: 0
Trigger filter: 0 μs
Logic module
Detection: BIT OR
Bit pattern: All bits disabled
Trigger filter: 0 μs
4. Recording
Mode: Standard
Data name: xxxx Automatic numbering: ON 1
Recording time: 0 d 0 h 0 min 10 s 0 ms
Start time: 01/01/2000 12:22 AM
Interval time: 0 d 0 h 0 min 0 s
Printer: ON; sheet 1; real-time printing: ON
SSD: ON; normal
Memory: ON; Points: 2 k; Recording blocks:1 ;
Endress mode: OFF; Pre-Trigger:50%
Thumbnail: No channel
5. Sheet SHEET1 is filled in from the youngest channel
6. Print
Header, annotations, or footer: Clear
Chart speed: All 10 min/div
7. Environment
PC name: RA3100-01
Language: Retained
Time zone: Retained
Date and time: Retained
Backlight timer: OFF
Display brightness: 10
8. Internal clock Retained