7.Playback Recorded Data - 7.4.FFT Analysis
76
1WMPD4004444
Analysis settings
Analysis selection:
Select Analysis1 or Analysis2.
Analysis Function:
Select Analysis1 or Analysis2. The X axis, Y axis, and CH selection are limited by the
analysis type. Available setting buttons are brighter.
X axis:
Sets the X axis of the analysis waveform.
Y axis:
Sets the Y axis of the analysis waveform. When manual scaling is disabled, the Y
axis is automatically set based on the analysis results. When enabled, the upper limit
value and lower limit value of the Y axis scale can be set manually.
Channel setting:
Sets the target channel for analysis. Time scale waveform to 1/3 octave in the
analysis types are settings only for channel 1 with one channel analysis, and Cross
power spectrum to Coherence function are settings for channel 1 and channel 2
with two channel analysis.
Peak:
Extracts the global maximum or local maximum from the analysis results and
displays the top 10 points in the results.
Summary of Contents for RA3100 Omniace
Page 1: ...RA3100 Omniace Instruction Manual 1WMPD4004444...
Page 173: ...13 Optional Parts 13 2 List of Probes Clamp Meters 1WMPD4004444 173 MEMO...
Page 174: ...13 Optional Parts 13 4 List of Spare Parts 174 1WMPD4004444 MEMO...
Page 175: ...Omniace RA3100 Instruction Manual 1WMPD4004444 1st Edition...
