A&D RA3100 Omniace, Instruction Manual

Page: 31 / 176

2.Pre-Measurement Procedures - 2.1.Before Switching On the Power
1WMPD4004444 31
Step 5. Attach the Z-fold paper adapter to the recording paper guide of
the printer cover.
Insert the Z-fold paper adapter with paper threaded into the
recording paper guide (the U-shaped groove) of this product
with the center knob facing down, and push it in until it clicks.
Bar for tension
Step 6. Pull out the paper.
Pull out the paper threaded into the Z-fold paper adapter about
10 cm under the bar for tension.
Step 7. Feed the paper to the recording paper outlet.
Insert the paper threaded into the Z-fold paper adapter from
above the platen roller of the printer block (black roller) from
the recording paper outlet of the printer bar and pull it out
about 10 cm.
Platen roller
Step 8. Close the printer cover.
When the paper has been fed through, pull it straight out so that
it does not sag, and close the printer cover securely.
NOTE
Place the cover of the box containing the paper on the printer side of this product to use as a paper
receptacle. To ensure smooth paper output, fold one or two sheets into the receptacle before use. Note
that although Z-fold paper usually folds automatically as it is output, some environmental conditions,
such as a humid atmosphere or the setting location, may cause the paper not to fold normally.