A&D RA3100 Omniace, Instruction Manual

Page: 86 / 176

8.Setup Details - 8.2.Main Unit Setup
86 1WMPD4004444
Restoring Recording Setup
The recording settings of this product are saved together with the recorded data.
Select the data for the recording conditions to restore/set again on the [Record management] screen,
and tap the Restore recording conditions key to set the recording conditions to the main unit.
NOTE
Saving the data with the recording conditions in the recording name (such as pressing the START key
then the STOP key in a short time) enables the recordings to be easily restored at a later date.
The data saved for recording conditions can be exported to external media by itself to easily restore
recording condition settings.
8.2.2. Export - Backing Up Recorded Data
Connect the external storage media (such as SD memory
card or USB stick) to the main unit and confirm that the
SD/USB indicator on the side menu activates.
Tap the Import/Export key on the bottom right of the
[Record management] screen to display the external media
selection dialog and select the target external media.
Tap OK to switch to the [Import/Export] screen.
Recorded data list on internal SSD
Recorded data list on external media
Place a check mark (
✔) on the data to back up
Place a check mark (
✔) in the selection field of the data to back up and tap the
Export key in the
center to export the recorded data.