A&D RA3100 Omniace, Instruction Manual

Page: 93 / 176

8.Setup Details - 8.2.Main Unit Setup
1WMPD4004444 93
RS-232C Setup
CAUTION
Caution Regarding RS-232C Settings
When using the RS-232C port of this product to communicate with an external device, match the RS-
232C settings with those of the host device.
Tap the [RS-232C] Edit key on the [Comm.] settings
screen to display the RS-232C settings dialog box.
(1)
(2)
(3)
(4)
(5)
(1) Baud rate: Sets the RS-232C data transmission speed.
Select 300, 600, 1200, 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200,
230400, or 46080 bps.
(2) Data bits: The number of bits in one byte of data. Fixed to 8 bits.
(3) Stop bits: The stop bits in one byte of data. Select 1 or 2 bits.
(4) Parity: The parity bit for one byte of data.
Select none, odd, even, mark, or space.
(5) Flow control: The flow control of communication. Hardware uses control via CTS/RTS for the
communication line.
Select none, Xon/Xoff, or Hardware.
8.2.6. Display Setup
Tap Display in the main unit setup to display the [Display] screen.
The auxiliary monitor display functions can be set on the [Display] screen.
Grid: Switches the grid lines of the waveform
monitor on or off.
Trigger line: Switches the trigger lines for trigger
detection on or off.
Mark line: Switches the mark lines for mark
detection on or off.
*
Mark line is available when the optional remote
control module is installed.