A&D RA3100 Omniace, Instruction Manual

Page: 30 / 176

2.Pre-Measurement Procedures - 2.1.Before Switching On the Power
30 1WMPD4004444
Step 2-2. Place the paper in the stock box with the thermally sensitive side (the side with blue numbers
printed on the edges) facing up.
Thermal sensitive side
Z-fold paper stock box
Step 2-3. Position the stock box so the thermal sensitive side of the paper is facing up and insert the box into
the case opening.
Thermal sensitive side Z-fold paper case
Step 3. Open the printer block by raising the lever of the printer cover.
After opening the printer cover, insert the paper pulled
out from the case into the opening under the printer
cover.
Printer cover
Insert the paper into the opening under the
printer cover
Z-fold paper
Step 4. Thread the paper through the Z-fold paper adapter.
Thread the paper inserted into the opening under
the printer cover through the Z-fold paper adapter as
shown in the figure.
Recording paper route
To platen roller
Z-fold paper adapter
Z-fold paper inserted
into Z-fold paper opening
Bar for tension Center side knob