A&D RA3100 Omniace, Instruction Manual

Page: 10 / 176

Symbols in This Manual
10 1WMPD4004444
Symbols in This Manual
Terms and symbols used in this manual denote as follows.
WARNING
This indicates a condition or practice that could result in personal injury or loss of
life, or may result in light injury or physical damage if this equipment is misused due
to neglect of a Warning.
CAUTION
This indicates a condition or practice that could result in light injury or damage to
the equipment or other property if this equipment is misused due to neglect of a
Caution.
NOTE
This indicates a condition or practice that could result in incorrect operation or
damage to data if this equipment is misused due to neglect of a Note, as well as
measurement limitations and additional explanations.
Reference page
A tap is the act of lightly touching an item such as a key displayed on the screen
with a finger.
Example Used for selecting or setting screen keys.
A swipe is the act of pressing the screen with a finger and moving it in a specific
direction.
Example Used on screens such as the [Thumbnail] screen and [Channel Setup]
screen.
A pinch in is the act of touching the screen with two fingers and moving those
fingers closer to each other, and reduces the screen.
Example Used to reduce the content displayed on the screen, waveform
amplitude, or time axis, etc.
A pinch out is the act of touching the screen with two fingers and moving those
fingers apart from each other, and enlarges the screen.
Example Used to enlarge the content displayed on the screen, waveform
amplitude, or time axis, etc.
__ key
Enclosed characters represent a key name on the operation panel.
Example START key
key
Text enclosed in indicates touch panel keys displayed on the screen.
Example CH key
[ ] screen
Text enclosed in [ ] indicates the text of items on the screen.
Example [Module 1]
k (lower case)
K (upper case)
Example 1 kg = 1000 g
1 KB = 1024 bytes