4.Configuring Measurement - 4.1.Reducing the Input Sensitivity and Connecting the Input Cable
36
1WMPD4004444
4.
Configuring Measurement
4.1.
Reducing the Input Sensitivity and Connecting the Input
Cable
Step 1. The input signal can be displayed and checked in realtime by switching the MEASURE
/PLAYBACK key on the side menu to MEASURE .
Step 2. Tap the CH key on the side menu to display the channel setup sub menu.
Step 3. When the Meas. range key is tapped in the channel setup sub menu, the border of the key
turns orange, the area around the rotary knob turns blue, and the rotary knob can be used to
change the setting.
Step 4. Turn the rotary knob counterclockwise to set the minimum input sensitivity.
(Turning the rotary knob clockwise increases the sensitivity.)
Channel setup sub menu
Counterclockwise
Clockwise
Sensitivity decreases
Sensitivity increases
Orange
Blue
Rotary knob
The key is selected,
the border of the key turns orange,
the area around the rotary knob turns
blue,
and the rotary knob can be used to
change the setting.
Summary of Contents for RA3100 Omniace
Page 1: ...RA3100 Omniace Instruction Manual 1WMPD4004444...
Page 173: ...13 Optional Parts 13 2 List of Probes Clamp Meters 1WMPD4004444 173 MEMO...
Page 174: ...13 Optional Parts 13 4 List of Spare Parts 174 1WMPD4004444 MEMO...
Page 175: ...Omniace RA3100 Instruction Manual 1WMPD4004444 1st Edition...
