6.Measuring Input Signals - 6.3.Starting and Ending Recording
60
1WMPD4004444
(1) Mode:
Selects the optimal mode from the nine recording modes.
(2) Data name:
Specifies the name of the recorded data.
When [Automatic numbering] is enabled, numbers are automatically appended
to the name.
(3) Recording time:
Ends recording after recording for the specified time after recording starts.
(4) Start time:
Starts recording at the specified time after starting measurement with
the START key.
(5) Interval time:
Performs recording at the specified interval. Recording ends when recording
has been performed the number of times specified in [Number of Recording
times].
(6) Recording device:
Enables/disables recording to the recording device (Printer, SSD, or Memory).
The devices can be set independently.
(7) Printer:
Enables/disables printer recording.
When enabled, the P-P data is recorded to the SSD with sampling of printer
recording.
Real-time printing:
When printer recording is enabled, real-time printing to the printer can be
enabled/disabled.
When enabled, the waveform of the specified sheet is printed from the printer
while saving the data of the printer recording.
When disabled, printing to the printer is not performed.
(8) SSD:
Enables/disables SSD recording.
(9) Memory:
Enables/disables memory recording.
Points:
Specifies the sampling count (the data count per channel) to record for each
memory recording.
Recording blocks:
Specifies the number of blocks to record for memory recording.
Endless mode:
When the endless mode is enabled, the blocks start to be overwritten from the
first block when the record blocks are full.
Pre-trigger:
Sets the pre-trigger in the memory block.
(10) Thumbnail:
Specifies the channels to display thumbnails for and the compression rate.
Recording Mode
This product has nine recording modes to enable complex measurement to be easily set.
Press the Mode key to display an explanation of each recording mode on the monitor and select a
mode suitable for the measurement to perform.
(1) Standard
(6) Start t interval (N times)
(2) Start time
(7) Start time + interval (N times)
(3) Start trigger
(8) Start time + Start t interval (N times)
(4) Interval (N times)
(9) Window recording
(5) Start time + Start trigger
Summary of Contents for RA3100 Omniace
Page 1: ...RA3100 Omniace Instruction Manual 1WMPD4004444...
Page 173: ...13 Optional Parts 13 2 List of Probes Clamp Meters 1WMPD4004444 173 MEMO...
Page 174: ...13 Optional Parts 13 4 List of Spare Parts 174 1WMPD4004444 MEMO...
Page 175: ...Omniace RA3100 Instruction Manual 1WMPD4004444 1st Edition...
