A&D RA3100 Omniace, Instruction Manual

Page: 148 / 176

12.Specifications - 12.2.Functional Specifications
148 1WMPD4004444
[Start trigger]
Item Specifications
Trigger source Channel trigger, forced trigger, external trigger
Channel trigger specified number of channels
1ch
[Memory trigger]
Item Specifications
Trigger source Channel trigger, forced trigger, external trigger
Channel trigger specified number of channels
18 channel AND/OR setting available
12.2.6. Monitor Function
Item Specifications
Display screen MEASURE
PLAYBACK Displays the state waveform of the input signal
Playback the memory, SSD, or printer recorded data
Waveform type Y-T waveform, X-Y waveform, FFT waveform
Enables waveform display for an arbitrary analog signal and logic signal
Y-T waveform
X-Y waveform
FFT waveform
Enables 48 channel/sheet signal display
Enables a maximum of four X-Y waveform sets to be displayed
Enables FFT analysis results to be displayed for a maximum of
two channels
Y-T waveform
display
Display width 20 div x 20 div
Time axis (T axis)
Amplitude axis (Y axis)
Display area
1 div = 100 samples
1 div = 1/10 RANGE (with display range at 100%)
Specifies the display position, display range, display maximum,
and display minimum
Sheet Enables waveform screens to be managed as three waveform screens (display channel
sets)
Display
functions
Numeric value display
Scale
Grid
Trigger/mark
Cursor
Pen position
Zero position
Time display
Pinch in/out Numeric value display of input signal
Scale display of amplitude axis
Grid display of waveform area
Displays detected trigger/mark
Displays two cursors
Displays the signal information (position and value) of the
cursors, information on the differences between cursors,
maximums, minimums, and averages
Displays the signal amplitude position
Displays the signal zero position
Displays the time on the bottom of the display area
Enlarges/reduces the display waveform
TRIG.SYNC Updates the waveform display screen when the trigger conditions are established