A&D RA3100 Omniace, Instruction Manual

Page: 73 / 176

7.Playback Recorded Data - 7.3.X-Y Waveform
1WMPD4004444 73
7.3. X-Y Waveform
Data recorded with the following conditions can be used to display the X-Y waveform if X - Y is
selected as the waveform format in the control bar. The X-Y waveform enables waveforms X-Y1 to X-Y4
to be displayed at the same time.
X-Y waveform conditions
Recording device: SSD
Sampling speed: 1 kS/s or lower
Data format: NORMAL
Analog input amp: 2 channels or above
X-Y waveform display
7.3.1X-Y Display Settings
7.3.2. X-Y Control
By tapping the Single/Quad key for display control, the X-Y waveform can be displayed as four
waveforms overlaid on a single screen or as four separate screens.
X-Y waveform (1 screen) X-Y waveform (4 screen)
7.3.1. X-Y Display Setup
The horizontal axis of the display settings box indicates the setting state of
waveforms X-Y1 to X-Y4 and allows the display to be switched on or off.
With the single screen display, specifies the scale of which channel to
display.
X axis, Y axis: Display the slot and channel number of each axis.
Display:
Switches the X-Y waveform display on/off
SC: Switches the scale display on/off