A&D RA3100 Omniace, Instruction Manual

Page: 23 / 176

1.Name and Function of Each Block -1.6.Screen and Setup Menu
1WMPD4004444 23
Control bar when playback
Touch the PLAYBACK key on the side menu to enter the playback mode and switch the control bar
to the menu for playback.
(1) (2) (3) (4) (5) (6) (7)
(1) Sampling speed : Displays the sampling speed of the recorded data.
Printer recording : 1 kS/s (100 ms/div) to 10 S/s (10 min/div)
SSD recording : 1 MS/s (100 μs/div) to 10 S/s (10 min/div)
Memory recording : 20 MS/s (5 μs/div) to 10 S/s (10 min/div)
(2) Data format : Displays either NORMAL or P-P as the format for the recorded data.
Only P-P is available for printer recording.
Only NORMAL is available for memory recording.
(3) Waveform format : Selects Y-T, X-Y, or FFT as the waveform format.
X-Y display and FFT analysis are only available when SSD recording is set.
(4) Sheet selection : Selects the waveform set to display on the screen.
(5) DATA : Selects and play back recorded data.
(6) DATA information : The information of the displayed playback data.
(7) Display switch : Switches the functions in the order WAVE → THUMBNAIL → CURSOR
→ PENREC .