A&D RA3100 Omniace, Instruction Manual

Page: 24 / 176

2.Pre-Measurement Procedures - 2.1.Before Switching On the Power
24 1WMPD4004444
2. Pre-Measurement Procedures
2.1. Before Switching On the Power
The preparations for using this product and the cautions are explained below.
2.1.1. Installation and Usage Environment
Use this product on a flat, level surface.
When using the printer, install it so that the recording
paper is level as indicated in the figure on the right.
CAUTION
Cautions Regarding the Installation Environment
Use this product at locations that satisfy the installation requirement, the Category II (CAT II) of the
safety standard for electrical measurement instruments in JIS C 61010-1 (IEC61010-1).
This product has a Pollution Degree of 2.
Use this product in the following operating environments.
Operating temperature range: 0 to 40°C Operating humidity range: 35 to 85% RH (without
condensation)
Do not use this product at the following locations. In addition, carefully check the environment when
using this product.
Locations where the temperature and humidity rise due to direct sunlight or heaters
Wet locations
Locations where salt, oil, or corrosive gases exist
Dusty locations
Locations subject to strong vibrations
Locations with a strong electromagnetic field
This product is provided with ventilation openings in order to prevent overheating.
Ensure that the ventilation openings remain unobstructed by covers or materials. Otherwise, the
internal temperature of the product rises, causing malfunctions.
Intake
Exhaust
Intake
Do not place highly combustible objects such as paper near the product.