A&D RA3100 Omniace, Instruction Manual

Page: 72 / 176

7.Playback Recorded Data - 7.2.Playback Recorded Data
72 1WMPD4004444
(4) Cursor selection
Select the cursor to change the cursor position for. The cursor switches in the order
A
⇒
B
⇒
A-B each tap.
Turn the rotary knob with A selected to move the cursor position of cursor A.
Turn the rotary knob with B selected to move the cursor position of cursor B.
Turn the rotary knob with A-B selected to move the cursor with the distance between and A and B
retained.
(5) Channel selection
Selects the channel to display in the cursor position
information. Tap the channel selection key to display the
channel selection screen indicated below, where you
can select the channel to display in the cursor position
information.
7.2.4. Printing Out
Press the PRINT key on the operation panel with the playback monitor displayed to use the printer to
print the waveform between cursors A and B on the monitor.
NOTE
After reading recorded data, cursor A indicates the start of the data and cursor B indicates the end of the
data.
Even if the time axis or waveform amplitude is enlarged on the monitor, the printer prints the recorded
time axis and amplitude set in the channel setup.