8.Setup Details - 8.1.Recording Setup
78
1WMPD4004444
8.1.2. Channel List
Tap Channel list to display a list of the input modules, then tap Common , Conversion , or
a module type above the list to display the corresponding list.
Common Setup
When Common is tapped, the settings common to all input modules are displayed, and you can tap
a cell to change the setting value of that cell.
The items in the list are indicated below.
Batch:
Enables the batch configuration of the selected channels.
You can tap Select all on the top right to select all the channels.
CH:
Displays the slot number and channel number, connected with a hyphen.
Module:
Displays the model of the input module.
CH name: Displays the user-defined name of the input signal. Tap this field to set the channel name.
Press and hold it to display the software keyboard for input.
Meas.:
Displays whether input is enabled or disabled. Tap to switch between enabled and disabled.
Sheet:
Displays the registered sheet number. Tap to switch between SHEET1 to SHEET3 .
Color:
Displays the waveform color displayed on the waveform monitor. Tap to change the waveform
color.
Summary of Contents for RA3100 Omniace
Page 1: ...RA3100 Omniace Instruction Manual 1WMPD4004444...
Page 173: ...13 Optional Parts 13 2 List of Probes Clamp Meters 1WMPD4004444 173 MEMO...
Page 174: ...13 Optional Parts 13 4 List of Spare Parts 174 1WMPD4004444 MEMO...
Page 175: ...Omniace RA3100 Instruction Manual 1WMPD4004444 1st Edition...
