A&D RA3100 Omniace, Instruction Manual

Page: 29 / 176

2.Pre-Measurement Procedures - 2.1.Before Switching On the Power
1WMPD4004444 29
Loading Z-fold Paper (Recording Paper)
To use Z-fold paper (YPS112), a Z-fold paper case (RA30-551, sold separately) is required.
<Z-fold paper>
YPS112
Length: 200 m
Folded width: 30 cm
To indicate how much paper is remaining, a page number (669 to 000) is printed on each page.
<Z-fold paper box>
RA30-551 Paper case
Z-fold paper case: Approx. 3 kg
Z-fold paper stock box: Approx. 300 g Z-fold paper stock box
Z-fold paper adapter: Approx. 200 g
Z-fold paper adapter
The procedures for loading the Z-fold paper are explained as follows.
Step 1. Place the product on top of the paper case.
With the paper case opening and the printer block facing the same direction, align the metal fittings
of the case with the legs of this product.
Opening Z-fold paper case
Step 2. Put the paper in the case.
Step 2-1. Remove the contents from the case, open the plastic bag and take out the piece of cardboard
covering the paper. Use the top cover of the case as a receptacle for the recorded paper.
Top cover (use as a receptacle
for the recorded paper) Cardboard (white)