A&D RA3100 Omniace, Instruction Manual

Page: 96 / 176

8.Setup Details - 8.3.Other setupOther
96 1WMPD4004444
(4) Brightness: Performs a brightness adjustment test on the LCD.
Tap the - key to make the screen darker.
Tap the + key to make the screen lighter.
(5) Printer: Displays the state of printer. You can also press the Start and
Stop key for test printing to check the printing state of the printer.
Test printing prints the date and time and serial number of the main unit
on recording paper, then prints a test pattern over the entire surface of
the paper. The test pattern can be used to check for horizontal density
variation and damage to the thermal head for printing.
<Example test print>
(6) Buzzer: Tap the buzzer ON/OFF button to emit a beep to confirm that the
buzzer works.
(7) LED: Check the state of the main unit using the LED on the operation panel.
Use the color around the rotary knob to check the fine/coarse setting.
PRINT: Orange
Fine: Orange
TRIG: Blue Coarse: Blue
START: Green
(8) KEY: Use this to check the rotary knob and keys of the operation panel.
The display on the screen is highlighted when a key on the operation panel is pressed or
the rotary knob is turned clockwise or counterclockwise.
Operation panel [Maintenance]
－
KEY
(9) Initialize: Initializes this product. Tap the Initialize key, then tap OK in
the confirmation dialog box displayed for executing initialization.
The product is turned off when initialization is complete.
Press the Power switch on the front panel to turn on the product.
For information on the initialized state, see "10.5.
Setup Information
after Executing Initialization ".