A&D RA3100 Omniace, Instruction Manual

Page: 33 / 176

2.Pre-Measurement Procedures - 2.2.Turning the Power On/Off
1WMPD4004444 33
Step 3. Connect the plug of the AC power cable to the power outlet.
Power outlet with ground terminal
Inlet side
to AC socket
Plug to
power outlet
AC power cable
Step 4. Turn the power switch of the product on.
When the Power switch on the operation panel of the
product is turned on, the green LED lights up and the power
turns on.
NOTE
Standby current flows to this product when the AC power
cable is connected to the power outlet.
Remove the power cable when the product will not be used
for an extended period of time.
Power switch
2.2.3. Confirming Normal Startup
The monitor screen of the RA3100 is displayed about one minute
after turning the power on.
NOTE
Do not touch the touch panel until the waveform monitor is
displayed. Doing so may lead to erroneous operations.
Immediately after purchase or initializing the main unit,
measurement is turned off for all channels and no waveform is
displayed.