Toshiba e-studio 2555c, Руководство по обслуживанию

Страница: 1464 / 1558

05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce
dure
Servic
e UI
08 Setting
Mode System User
interface Display setting 9051 Panel calibration
setting value 0 0-1 SYS Switches whether the screen for displaying panel
calibration setting values is displayed or not.
0: Disabled (screen not displayed)
1: Enabled (screen displayed)
1 Yes
08 Setting
Mode System Maintenan
ce General 9059 Operation switching at
calibration Refer to
contents
0-1 SYS Switches whether a menu for selecting paper in user
calibration (automatic gamma adjustment) is displayed
or not.
0: Not displayed
1: Displayed (copy/print)
<Default value>
MJD: 1
Others: 0
1 Yes
08 Setting
mode System 9060 Destination display at
SRAM initialization Refer to
contents
0-255 SYS 0: MJD 1: NAD 2: JPD 3: AUD 4: CND 5: Not
defined 6: TWD 7: Not defined 8: Not defined 9: ASD
10: ARD 11: Not defined
<Default value>
JPD: 2 NAD: 1 MJD: 0 ASD: 9 AUD: 3 TWD: 6
CND: 4 ARD: 10
2
08 Setting
Mode System HDD 9065 HDD diagnostic menu
display - - SYS Displays the HDD information. 2 Yes
08 Setting
Mode System HDD 9072 Performing HDD
testing - - SYS Checks the bad sector. It may take more than 30
minutes to finish the checking.
3
08 Setting
mode System General 9081 Initialization of
department
management
information - - SYS Initializing of the department management information
Enter the code with the digital keys and press the
[INITIALIZE] button to perform the initialization.
If the area storing the department management
information is destroyed for some reason, "Enter
Department Code" is displayed on the control panel
even if the department management function is not set
on. In this case, initialize the area with this code. This
area is normally initialized at the factory.
3
08 Setting
Mode System Initializatio
n 9083 Initialization of NIC
information - - SYS Returns the value to the factory shipping default value. 3 Yes
227