Toshiba e-studio 2555c, Руководство по обслуживанию

Страница: 1442 / 1558

05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce
dure
Servic
e UI
08 Setting
Mode System User
interface 8718 Selection for caching
the screen of control
panel at start-up 0 0-17 SYS Use this code to shorten the time to switch the function
on the control panel for the first time immediately after
start-up. However, the start-up time becomes longer
(about 1 to 3 seconds per screen). When selecting
multiple screens, enter the total value.
0: Disabled
1: Copy
16: Fax
1
08 Setting
Mode System Network 8719 MTU setting of
network
communication 1500 576-1500 NIC Normally there's no need to change the MTU value.
However, set the proper MTU value when MFP is
connected to the Internet using broadband router and
so on.
12
08 Setting
Mode System User
interface 8720 Department code
display with asterisk 0 0-1 SYS 0: Displays department code with asterisk when
inputting it.
1: Displays department code as it is when inputting it.
1 Yes
08 Setting
Mode System FAX 8721 Automatic FAX
sending at AutoClear
when scanning
original put on the
glass 0 0-1 SYS Sets whether the job is sent or canceled when
AutoClear is executed on the interruption screen to
confirm the next original displayed after scanning the
original put on the glass. Use this code to cancel job
when the equipment is left unattended while the
interruption screen is displayed.
0: Sends job
1: Cancels job
1 Yes
08 Setting
Mode System User
interface 8722 Display method of
"Cannot find the
Home Directory" on
the control panel 0 0-1 SYS Sets the display method of error if the Home Directory
for user cannot be obtained from the server when
setting the Home Directory for scanning. Use this code
to disable the pop-up display when the Home Directory
cannot be obtained depending on the user.
0: Displays the pop-up dialogue when user logs in
1: Displays the message in the guidance area when the
Scan to File screen is displayed
1 Yes
08 Setting
Mode System User
interface 8723 Pop-up display of
logging out of user
authentication and
department
management on the
control panel 1 0-1 SYS Sets whether the pop-up dialog of confirmation for
logging out is displayed when user or department logs
out by pressing [FUNCTION CLEAR] button twice or
pressing [ACCESS] button.
0: Logs out without displaying pop-up dialog
1: Displays pop-up dialog when logging out
1 Yes
205