Toshiba e-studio 2555c, Руководство по обслуживанию

Страница: 778 / 1558

e-STUDIO2555C/3055C/3555C/4555C/5055C © 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 222
[F106_1] ADI-HDD error: HDD type detection error
[F106_2] ADI-HDD error: ADI encryption key download operation error
Classification Error item
Other service call
ADI-HDD error: HDD type detection fails.
Check item Measures
Setting If the error is not recovered after rebooting the equipment
or no abnormality is found on any check items for the HDD,
reinstall the system software.
HDD • Connector check
• Harness check
• Start the equipment in the 5C mode: [5] + [C] +
[POWER]
Check the file system and recover it if necessary.
If the recovery fails, replace the HDD.
If the equipment does not start in the 5C mode, also
replace the HDD.
• Check that either the ADI-HDD or SATA-HDD (normal
type) is mounted.
1. Start the equipment in the 4C mode: [4] + [C] +
[POWER]
2. Check the type of the HDD shown on the top left of the
control panel display "Current HDD type".
Normal status: ADI-HDD or SATA-HDD
Abnormal status: Unknown HDD
If "Unknown HDD" is displayed, reinstall the system
software.
Classification Error item
Other service call
ADI-HDD error: Downloading of or consistency check for ADI-
HDD encryption key fails.
Check item Measures
Setting Checking of ADI-HDD encryption key status
1. Start the equipment in the 3C mode: [3] + [C] +
[POWER]
2. The authentication menu is displayed. Press [OK]. (Not
required in the default setting)
3. Select "5. Key Backup Restore" and then press the
[START] button.
4. Check the status of the ADI-HDD encryption key on the
Key Backup Restore Mode menu.
5. After the operation is completed, shut down the
equipment by pressing the [POWER] button.
• In case both the SRAM ADIKey and FROM ADIKey
status are OK
Reinstall the system firmware.
• In case either the SRAM ADIKey or FROM ADIKey
status is other than OK
Restore the ADI-HDD encryption key.
• In case both of the SRAM ADIKey or FROM ADIKey
status are other than OK
Reinstall the system software.