Toshiba e-studio 2555c, Руководство по обслуживанию

Страница: 519 / 1558

7
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2555C/3055C/3555C/4555C/5055C
PREVENTIVE MAINTENANCE (PM)
7 - 5
In addition, when the developer unit is recognized as a new one by the M developer unit old/new
detection switch, or the auto-toner sensor adjustment is performed, the counter is also reset.
• 08-5574: Current value of PM counter [developer material (C)]
• 08-5575: Current value of PM time counter [developer material (C)]
When the current value of “DEVELOPMENT UNIT” on the main screen or “CYAN DEVELOPER (C)”
on the sub-screen in the PM support mode is cleared, the counter is reset.
In addition, when the developer unit is recognized as a new one by the C developer unit old/new
detection switch, or the auto-toner sensor adjustment is performed, the counter is also reset.
• 08-5576: Current value of PM counter [parts other than the PM parts of the process unit]
• 08-5577: Current value of PM time counter [parts other than the PM parts of the process unit]
When the current value of “2nd TRANSFER” on the main screen or “2nd TRANSFER ROLLER” on
the sub screen in the PM support mode is cleared, the counter is reset.
7.3 General Descriptions for PM Procedure
(1) Preparation
•
Ask the user about the current conditions of the equipment and note them down.
• Before starting maintenance, make some sample copies and store them.
• See the replacement record and check the parts to be replaced in the PM support mode (6S)
or list printing mode (9S-103).
6S : [6] + [START] + [POWER] ON
9S-103 : [9] + [START] + [POWER] ON
→
[103]
→
[START]
Fig. 7-1
• Turn OFF the power and make sure to unplug the equipment.
(2) Perform a preventive maintenance using the following checklist and illustrations. Refer to the
Service Manual if necessary.
(3) Plug in the equipment after the maintenance has been finished. Then turn ON the power and
make some copies to confirm that the equipment is working properly.
PM SUPPORT CODE LIST S/N : CYL000001 FIN S/N : FIN S/N-xxxxxxxx TOTAL : 2146
2012-04-09 13:16 TOSHIBA e-STUDIOxxxx DF TOTAL : 1213
UNIT OUTPUT PAGES PM OUTPUT PAGES DRIVE COUNTS PM DRIVE COUNTS
DEVELOP COUNTS DEVELOP COUNTS
DRUM(K) 1957 1957 3940 170000
DRUM BLADE(K) 1957 1957 10870 170000
GRID(K) 1957 1957 10870 170000
MAIN CHARGER NEEDLE(K) 1957 1957 10870 170000
CHARGER CLEANING PAD(K) 1957 1957 10870 170000
DRUM(Y) 1077 1077 3766 170000
DRUM BLADE(Y) 1077 1077 3766 170000
GRID(Y) 1077 1077 3766 170000
MAIN CHARGER NEEDLE(Y) 1077 1077 3766 170000
CHARGER CLEANING PAD(Y) 1077 1077 3766 170000
DRUM(M) 1077 1077 9547 170000
DRUM BLADE(M) 1077 1077 9547 170000
GRID(M) 1077 1077 9547 170000
MAIN CHARGER NEEDLE(M) 1077 1077 9547 170000
CHARGER CLEANING PAD(M) 1077 1077 9547 170000
DRUM(C) 1077 1077 9547 170000
DRUM BLADE(C) 1077 1077 9547 170000
GRID(C) 1077 1077 9547 170000
MAIN CHARGER NEEDLE(C) 1077 1077 9547 170000
CHARGER CLEANING PAD(C) 1077 1077 9547 170000