Toshiba e-studio 2555c, Руководство по обслуживанию

Страница: 1086 / 1558

05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce
dure
Servic
e UI
05 Adjustmen
t mode Scanner Scanner 3218 Shading correction
plate Automatic dust
detection adjustment - - - Performs adjustment for automatic dust detection with
the shading correction plate. If dust is detected, shading
correction is performed by avoiding the dust. 6
05 Adjustmen
t mode Scanner Scanner Size detection of
original 3233 Position adjustment in
the primary scanning
direction 128 0-255 SYS Adjusts the detection range for size of original. 1
05 Adjustmen
t mode Scanner Scanner Size detection of
original 3234 Waiting position
adjustment of carriage 200 0-255 SYS Adjusts the position where the carriage stops at the size
detection of the original.
Default value: 100 (10 mm from leading edge of
original)
Maximum value: 255 (25.5 mm from leading edge of
original)
Minimum value: 0 (0 mm from leading edge of original)
1
05 Adjustmen
t mode Scanner Scanner Size detection of
original 3236 Adjustment of lamp
lighting time 128 0-255 SYS Adjusts the lighting time of the lamp at the size
detection of the original.
Maximum value: 255 (Minimum time + 2040ms)
Minimum value: 0 (Minimum time)
1
05 Adjustmen
t mode Scanner Scanner Size detection of
original 3237 Starting time
adjustment of lamp
lighting 64 0-255 SYS Adjusts the starting time of lamp lighting when the
detection accuracy of dark originals is poor.
Maximum value: 255 (Minimum time + 2040 ms)
Minimum value: 0 (Minimum time)
1
05 Adjustmen
t mode Printer Image Adj. of primary scan.
writing start 4006 ALL 128 0-255 M When the value increases by "1", the writing start
position shifts to the front side by approx. 0.0423 mm. 1 Yes
05 Adjustmen
t mode Printer Drive
system Fine adjustment of
ADU motor rotational
speed 4016 0 Transport speed:
Normal speed 128 0-255 M 0.1%/step 4
05 Adjustmen
t mode Printer Drive
system Fine adjustment of
ADU motor rotational
speed 4016 4 Transport speed:
Decelerating 128 0-255 M 0.1%/step 4
05 Adjustmen
t mode Printer Drive
system Fine adjustment of
ADU motor rotational
speed 4016 8 Transport speed1 128 0-255 M 0.1%/step 4
05 Adjustmen
t mode Printer Drive
system Fine adjustment of
ADU motor rotational
speed 4016 9 Transport speed2 128 0-255 M 0.1%/step 4
05 Adjustmen
t mode Printer Drive
system Fine adjustment of
ADU motor rotational
speed 4016 10 Transport speed3 128 0-255 M 0.1%/step 4
05 Adjustmen
t mode Printer Drive
system Fine adjustment of
ADU motor rotational
speed 4016 11 Transport speed4 128 0-255 M 0.1%/step 4
27