Toshiba e-studio 2555c, Руководство по обслуживанию

Страница: 621 / 1558

8
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2555C/3055C/3555C/4555C/5055C
ERROR CODE AND TROUBLESHOOTING
8 - 65
[E0A0]Image transport ready time-out jam
[E550] Paper remaining jam on the transport path
Check item Measures
Other • Check if there is any paper in the equipment. Remove it if
there is.
• If the error still occurs, check the following.
Power Check if the error is cleared by turning the power OFF and
then back ON.
SYS board • Connector check
• Board check
LGC board • Connector check
• Board check
HDD • Connector check
• HDD check
Replace parts Remarks
SYS board
LGC board
HDD
Classification Error content
Other paper jam Image transport ready time-out jam
Check item Measures
LGC board Connector check
Parts to be replaced Remark
LGC board
Classification Error content
Other paper jam Paper remaining on the transport path when printing is finished
(caused by a multiple paper feeding)
Step Check Item Result Measure
Next
Step
1
Jamming transport path Open the cover of the unit/area whose
picture is flashing on the control panel
and remove any paper on the transport
path.
2
Feed or transport roller possibly
causing multiple feeding Check the feed roller.
3
Sensor in the jamming area • Sensor check (Refer to the table
below)
• Harness check
• Connector check