Toshiba e-studio 2555c, Руководство по обслуживанию

Страница: 886 / 1558

e-STUDIO2555C/3055C/3555C/4555C/5055C © 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 330
8.5.33 Toner scattering
Fig.8-41
Remarks:
• To select a paper type, refer to the Copying Guide.
• To set 2nd transfer output, refer to the Imaging Manual [1.3].
Cause/Section Step Check Item Measure Remark
2nd transfer
output 1 <Thick paper>
Is toner scattered on the
image on the back side of the
paper in duplex printing when
it is fed from the bypass tray? Select [BACK] for the
paper type setting and
then copy the back side
of the paper.
2 <Plain paper>
Is toner scattered on the
image on the back side of the
paper in duplex printing when
it is fed from the bypass tray? Perform automatic
duplex copying with the
Automatic Duplexing
Unit (ADU). This problem
may occur when
the paper is dry
under a low
humidity
environment.If
plain paper is
used, [BACK]
and bypass
feeding cannot
be selected
together. In this
case, use the
ADU or select
[RECYCLED
PAPER].
If the ADU is not
available, select
[RECYCLED PAPER]
for the paper type
setting and then copy
the back side of the
paper.
If the problem is not
resolved, adjust the
transfer output for
recycled paper and then
copy the back side of
the paper by selecting
[RECYCLED PAPER].
Feeding direction