Toshiba e-studio 2555c, Руководство по обслуживанию

Страница: 1307 / 1558

05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce
dure
Servic
e UI
08 Setting
mode Printer Maintenan
ce Display of details of
CE80 4706 1 M 0 0-15 M Displays the details of CE80. Enter "0" to clear the
error.
0=Normal, 1=Error
bit0: Not connected
bit1: Mix
bit2: Checksum mismatch
bit3: Gradation module error 4
08 Setting
mode Printer Maintenan
ce Display of details of
CE80 4706 2 C 0 0-15 M Displays the details of CE80. Enter "0" to clear the
error.
0=Normal, 1=Error
bit0: Not connected
bit1: Mix
bit2: Checksum mismatch
bit3: Gradation module error 4
08 Setting
mode Printer Maintenan
ce Display of details of
CE80 4706 3 K 0 0-15 M Displays the details of CE80. Enter "0" to clear the
error.
0=Normal, 1=Error
bit0: Not connected
bit1: Mix
bit2: Checksum mismatch
bit3: Gradation module error 4
08 Setting
mode Printer General 4708 Switchover setting of
transport control for
custom size
(297x431.8mm) 0 0-1 M When feeding 305 x 457 mm sized paper by bypass
feeding, set the value of this code to "1" for JAM
detection. When the value is set to "1", the print speed
decreases.
0: Disabled (Setting for 297 × 431.8 mm)
1: Enabled (Setting for 305 × 457 mm) 1
08 Setting
mode Printer Feeding
system /
Paper
transport Performance
improvement at retry
by bypass feeding 4713 0 Plain paper/Recycled
paper 0 0-1 M Use this code when retry by bypass feeding occurs
frequently and the performance decreases. Note that
the performance decreases if this setting is enabled
when retry does not occur.
0: Disabled 1: Enabled 4
08 Setting
mode Printer Feeding
system /
Paper
transport Performance
improvement at retry
by bypass feeding 4713 1 Thick paper 1 0 0-1 M Use this code when retry by bypass feeding occurs
frequently and the performance decreases. Note that
the performance decreases if this setting is enabled
when retry does not occur.
0: Disabled 1: Enabled 4
70