Toshiba e-studio 2555c, Руководство по обслуживанию

Страница: 1253 / 1558

05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce
dure
Servic
e UI
08 Setting
mode Process Cleaner Control of
photoconductive drum
idling in standby mode 2383 Maximum number 5 0-6 M Refer to "3.11.4 Drum driving sleep mode".
0: Once 1: Twice 2: 3 times 3: 4 times 4: 5 times 5: 7
times 6: 10 times 1
08 Setting
Mode Process Developm
ent 2385 Setting of the number
of sheets to shift to
sleep mode for the
drum drive 7 1-255 M Setting value x 10 (sheets) 1
08 Setting
Mode Process Fuser 2386 Condition of shift to
pre-sleep mode
(temperature) 4 0-7 M 0: None (Temperature condition is disabled)
1: 10 degrees C or less 2: 12 degrees C or less 3: 14
degrees C or less 4: 16 degrees C or less 5: 18
degrees C or less 6: 20 degrees C or less 7: 22
degrees C or less 1
08 Setting
Mode Process Developm
ent Main charger/LED
head 2387 Synchronization
setting of notice for
cleaning 0 0-1 M Synchronizes the display timing of the cleaning of the
main charger and LED head. If the synchronization
setting is enabled, the main charger and LED head may
become dirty because of the insufficient cleaning.
0: Disabled
1: Enabled 1
08 Setting
Mode Process Image
control Image quality Image quality closed-
loop control 2486 Contrast voltage 1 0-1 M Sets whether or not correcting the contrast voltage in
image quality control.
0: Invalid
1: Valid 1
08 Setting
mode Process Image
control Image quality Image quality closed-
loop control automatic
start-up 2492 At the first power-ON
in the morning 1 0-2 M Sets the behavior of closed-loop control at power-ON
when the fuser roller temperature becomes below the
specified level.
0: Disabled
1: Enabled (Performed in the short mode)
2: Enabled (Performed in the full mode) 1
08 Setting
mode Process Image
control Image quality 2493 Vc default value open
method selection 1 0-1 M 0: Calculated with environmental parameter
1: Result of last close + environmental variation 1
08 Setting
mode Process Image
control Image quality 2495 Enable/Disable setting
of image quality close
IQC Short mode 1 0-1 M 0: Disabled 1: Enabled 1
16