Toshiba e-studio 2555c, Руководство по обслуживанию

Страница: 102 / 1558

e-STUDIO2555C/3055C/3555C/4555C/5055C © 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
3 - 62
[ 6 ] General operation
[A] From power-ON to ready status
If either of the sensors on the transport path is ON (means there is paper on the transport path) when
the equipment is turned ON, it is determined that a paper jam has occurred and no operation is enabled
until the paper is removed.
[B] Ready status
When a drawer is inserted or removed at ready status, to check the availability of paper.
[C] Bypass feeding
• The bypass feed sensor detects the passing of paper.
• The bypass feed clutch is turned ON, and the bypass feed roller is rotated to start feeding.
• The leading edge of the paper turns the registration sensor ON, and the paper is aligned with the
registration rollers.
• The bypass feed clutch is turned OFF, and the bypass feed roller is stopped.
• The registration motor is turned ON, and the paper is transported to the transfer unit.
[D] Paper feeding
• Lower drawer
- The feed clutch and high speed clutch is turned ON, and the pickup roller, feed roller
and transport roller rotate to start paper feeding.
- The leading edge of paper turns the paper feed sensor ON, and the feed clutch is
turned OFF. (Pick-up roller and feed roller stop rotating.)
- The leading edge of paper turns the registration sensor ON and the paper is aligned
by the registration rollers.
- The high speed clutch is turned OFF, and the transport roller stop rotating.
- The registration motor and low speed clutch are turned ON, and the paper is
transported to the transfer unit.
• Upper drawer
- The feed clutch is turned ON and the pickup roller and feed roller rotate to start
paper feeding.
- The leading edge of paper turns the registration sensor ON, and the paper is
aligned by the registration rollers.
- The feed clutch is turned OFF and the pickup roller and feed roller stop rotating.
- The registration motor is turned ON, and the paper is transported to the transfer
unit.