Toshiba e-studio 2555c, Руководство по обслуживанию

Страница: 1141 / 1558

05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce
dure
Servic
e UI
05 Adjustmen
t mode Printer Feeding
system/Pa
per
transport Paper aligning
amount correction
value (speed at low
temperature) ADU 4835 29 Short size 3 14 -30-30 M Sets the correction value for speed at low temperature
which is applied to the current adjustment value.
When the value increases by "1", the aligning amount
increases by approx. 0.8 mm.
* This code is valid for 45/50ppm only.
<Paper length>
Long size: 330 mm or longer
Middle size: 220 mm to 329 mm
Short size 1: 205 mm to 219 mm
Short size 2: 160 mm to 204 mm
Short size 3: 159 mm or shorter 4
05 Adjustmen
t mode Printer Feeding
system/Pa
per
transport Paper aligning
amount correction
value (speed at low
temperature) 4835 30 LCF 7 -30-30 M Sets the correction value for speed at low temperature
which is applied to the current adjustment value.
When the value increases by "1", the aligning amount
increases by approx. 0.54 mm.
* This code is valid for 45/50ppm only.
<Paper length>
Long size: 330 mm or longer
Middle size: 220 mm to 329 mm
Short size 1: 205 mm to 219 mm
Short size 2: 160 mm to 204 mm
Short size 3: 159 mm or shorter 4
05 Adjustmen
t mode Process Transfer 2nd transfer trailing
edge bias correction
factor (Front side in
the color mode) 5400 0 Plain paper 0 0-16 M Corrects the 2nd transfer trailing edge bias.
Offsetting level
0: 1.00 1: 0.95 2: 0.90 3: 0.85 4: 0.80 5: 0.75 6: 0.70
7: 0.65 8: 0.60 9: 0.55 10: 0.50 11: 0.45 12: 0.40 13:
0.35 14: 0.30 15: 0.25 16: 0.20 4
05 Adjustmen
t mode Process Transfer 2nd transfer trailing
edge bias correction
factor (Front side in
the color mode) 5400 1 Thick paper 1 0 0-16 M Corrects the 2nd transfer trailing edge bias.
Offsetting level
0: 1.00 1: 0.95 2: 0.90 3: 0.85 4: 0.80 5: 0.75 6: 0.70
7: 0.65 8: 0.60 9: 0.55 10: 0.50 11: 0.45 12: 0.40 13:
0.35 14: 0.30 15: 0.25 16: 0.20 4
82