Installation
Standard Hardware Configurations
2-6
Partisol 2000
i
and Partisol 2000
i
-D Instruction Manual
Thermo Fisher Scientific
d.
Secure the assembly to the enclosure using the screws and washers
previously removed (
Figure 2–4
).
IMPORTANT
Place the washers between the ambient temperature bracket
and the enclosure – not under the head of the screw – to keep water from
leaking into the electronics compartment.
▲
e.
Plug the ambient temperature probe into the connector on the back
panel of the Sampler labeled “Ambient Temperature” (
Figure 2–5
).
Figure 2–4.
Ambient Temperature Probe Assembly Mounted on the Enclosure
Figure 2–5.
Ambient Temperature Probe Plugged into the “Ambient
Temperature” Connector
