Communications Using iPort or RPComm
Using RPComm
Thermo Fisher Scientific
Partisol 2000
i
and Partisol 2000
i
-D Instruction Manual
D-25
9.
The Station Setup portion of the screen should have been set when you
established your direct connection (steps 1 and 2). Do not modify these
settings.
10.
Select the “Modem Setup >>” button to display the Modem Properties
screen (
Figure D–23
).
Figure D–23.
Modem Properties Screen
11.
Generally, the values that your system chooses for variables on this
screen are appropriate for a proper connection. However, if your unit
and modem experience communication difficulties, these setting may
need to be altered. Contact your modem’s manufacturer for more
information, if necessary.
12.
Select “OK” to exit the Modem Properties screen. The AK Protocol
Setup screen (
Figure D–22
) will now appear as the active screen on
your computer.
13.
In the AK Protocol Setup screen, enter the phone number to be called
in the “Phone Number” box at the bottom of the screen. Do not enter
anything in the “Dialing String” box. This setting will be automatically
configured by the system.
14.
Select the “Dialing Setup >>” button to display the Dialing Properties
screen (
Figure D–24
).
