C-Link Protocol Commands
Communications Configuration
Thermo Fisher Scientific
Partisol 2000
i
and Partisol 2000
i
-D Instruction Manual
B-25
Send:
set
dhcp
on
Receive:
set dhcp on ok
format
This command reports the current reply termination format. The following
example shows that the reply format is 00, which means reply with no
checksum, according to
Table B–5
.
Send:
format
Receive: format
00
set format
format
This command sets the reply termination
format
, where
format
is set
according to
Table B–5
. The following example sets the reply termination
format to checksum.
Send:
set
format
01
Receive:
set format 01 ok
Table B–5.
Reply Termination Formats
Format
Reply Termination
00 <CR>
01
<NL> sum xxxx <CR>
where xxxx = 4 hexadecimal digits that represent the sum of all the
characters (bytes) in the message
host name
This command reports the host name string. The following example
reports the host name is set to
i
Series. This command returns “bad cmd” if
no host name has been set.
Send:
host
name
Receive: host
name
iSeries
set host name
string
This command sets the host name
string
, where
string
is 1-13 alphanumeric
characters (with no spaces). The following example sets the host name to
analyzer01. This command returns “bad cmd” if no host name has been
set.
Send:
set host name analyzer01
Receive:
set host name analyzer01 ok
instr name
This command reports the instrument name.
