Firmware Screen Descriptions
Instrument Setup Menu
Thermo Fisher Scientific
Partisol 2000
i
and Partisol 2000
i
-D Instruction Manual
9-47
NETMASK:
CURRENT: 255.255.255.0
SET TO: 255.255.255.00
0
MOVE CURSOR
CHANGE VALUE
SAVE VALUE
CTRST SSET INSTS STAT
The Default Gateway screen is used to edit the gateway address. The
default gateway can only be changed when DHCP is Off. If DHCP is On,
the instrument will respond with “Not Settable if DHCP is On.” For more
information on DHCP, see “
Use DHCP
” in this chapter. Any traffic to
addresses that are not on the local subnet will be routed through this
address.
In the Main Menu, choose Instrument Setup > Communications >
TCP/IP Settings
>
Gateway
.
DEFAULT GATEWAY:
CURRENT: 192.168.1.1
SET TO: 192.168.001.00
1
MOVE CURSOR
CHANGE VALUE
SAVE VALUE
CTRST SSET INSTS STAT
The Host Name screen is used to edit the host name. When DHCP is
enabled, this name is reported to the DHCP server.
In the Main Menu, choose Instrument Setup > Communications >
TCP/IP Settings
>
Host Name
.
HOST NAME:
CURRENT: iSeries
i
Series ?
ABCDEFGHIJKLMN BKSP
OPQRSTUVWXYZ PAGE
0123456789 ./- SAVE
CTRST SSET INSTS STAT
The Network Time Protocol (NTP) Server screen is used to edit the IP
address of the NTP server. An NTP server may be used to periodically
synchronize the instrument’s real-time clock with a standard. More
Default Gateway
Host Name
Network Time Protocol
Server