Sony GY-8240FC, Руководство по обслуживанию

Страница: 181 / 444

4-1
GY-8240UWD
GY-8240FC
Section 4
Tape Path Alignment
4-1. Genaral Information for Tape Path Adjustment
4-1-1. Notes
1. Cassette Compartment
.
The tape path adjustment should be performed under the state that the cassette compertment is re-
moved. If not, some checks and adjustments may be impossible.
.
When the tape path adjustment is performed with the cassette compartment removed, the tape protec-
tion circuit is activated and the “ERROR” message may be displayed. In this case, turn the power off,
then turn it on again.
2. Cassette
The tape path adjustment is performed after the cassette compertment removal. Then, it is necessary to
make a modification to the cassette and alignment tape that are used for tape path adjustment as follows.
Cassette tape with holding lid
Open the cassette lid
2
while pushing the lock knob
1
and fix the cassette lid using an adhesive tape
3
.
When setting the cassette or the alignment tape on the VTR, put it to the cassette supports on the mechan-
ical deck. And then, put a weight on the cassette so that it does not rise up. The weight about 1000 g is
suitable.
1
2
3
Cassette lid
Lock knob