User Manual of EM730/EM730E Series Inverter
71
F02.00
Options of X1 digital input
function
0: no function
1: terminal running (RUN)
2: running direction (F/R)
3: stop control in three-line operation
4: forward jog (FJOG)
5: reverse jog (RJOG)
6: terminal UP
7: terminal DOWN
8: clear UP/DOWN offset
9: free stop
10: Reset protection
11: multi-segment speed terminal 1
12: multi-segment speed terminal 2
13: multi-segment speed terminal 3
14: multi-segment speed terminal 4
15: multi-segment PID terminal 1
16: multi-segment PID terminal 2
17: multi-segment torque terminal 1
18: multi-segment torque terminal 2
19: acceleration and deceleration time terminal 1
20: acceleration and deceleration time terminal 2
21: Acceleration and deceleration prohibition
22: operation pause
23: External protection input
24: Switching of RUN command to keyboard
25: switching of RUN command to communication
26: Frequency source switching
27: clearing of regular running time
28: speed control/torque control switching
29: torque control prohibition
30: motor 1/motor 2 switching
31: resetting of simple PLC status (running from the first
segment, with the running time cleared)
32: simple PLC time pause (keep running at current
segment)
33: retention
34: counter input (≤250Hz)
35: high-speed count input (≤100kHz, only valid for X5)
36: count clearing
37: length counter input (≤250Hz)
38: High-speed length counting input (≤100kHz, only
valid for X5)
39: Reset length (clear by meter)
40: Pulse input (≤100kHz, only valid for X5)
1
〇
F02.01
Options of X2 digital input
function
2
〇
F02.02
Options of X3 digital input
function
11
〇
F02.03
Options of X4 digital input
function
12
〇
F02.04
Options of X5 digital input
function
13
〇
F02.07
Options of AI1 digital input
function
0
〇
F02.08
Options of AI2 digital input
function
0
〇
