User Manual of EM730/EM730E Series Inverter
238
7.13
Keyboard and Display Function Parameter Group of F12 Group
Function
code
Function code
name
Parameter description
Unit
Default
setting
Attribute
F12.00
M.K
multi-function key
options
0: no function
1: forward jog
2: reverse jog
3: forward/reverse switching
4: quick stop
5: free stop
6: cursor movement to the left
1
〇
M.K
is a multi-function key, of which the function can be performed by setting the
function code F12.00. If F12.00=0, this key has no effect when pressed. For other settings, the
corresponding effects will be obtained when this key is pressed.
Function
code
Function code name
Parameter description
Unit
Default
setting
Attribute
F12.01
Options
of
stop
function of STOP key
0: valid only in keyboard
control
1:
with
all
command
channels valid
1
〇
According to the setting of the function code F00.02 (command source option), the
command sources are divided into the keyboard, terminal and communication. If the terminal is
selected as the current command source, the Run
and Stop
key on the keyboard
will be unavailable. In more dangerous cases, however, the fastest way is to stop the inverter via
the Stop
key on the keyboard to resolve dangers. It is the most convenient to use the
keyboard to stop the inverter during normal operation. Therefore, the function code “F12.01:
stop function options of the STOP key” is added. In addition, the STOP key is always valid by
default.
★
It is recommended not to modify this parameter. If necessary, please set it carefully.
Function
code
Function code
name
Parameter description
Unit
Default
setting
Attribute
F12.02 Parameter locking
0: do not lock
1: reference input not locked
2: all locked, except for this
function code
0
●
In order to avoid unnecessary danger caused by keyboard operation or misoperation of
