User Manual of EM730/EM730E Series Inverter
151
asynchronous motor
2: rotation self-learning of
asynchronous motor
11: static self-learning of
synchronous motor
12: rotary self-learning of
synchronous motor
F01.34=0
: not identified
F01.34=1
: the asynchronous motor remains stationary during parameter self-identification.
Prior to the static self-learning of the asynchronous motor, please set the motor type
(F01.00) and motor nameplate parameters (F01.01 to F01.08) correctly. Relevant parameters
(F01.09 to F01.13) of the asynchronous motor can be obtained during static self-learning.
This mode is mainly used when the motor cannot rotate. Static self-learning has poorer
effects than rotary self-learning.
F01.34=2
: the asynchronous motor rotates during parameter self-identification.
Prior to the rotary self-learning of the asynchronous motor, please set the motor type
(F01.00) and motor nameplate parameters (F01.01 to F01.08) correctly. Relevant parameters
(F01.09 to F01.18) of the asynchronous motor can be obtained during rotary self-learning.
This mode is mainly used when the motor can rotate. However, loads should be avoided or
minimized; otherwise, self-learning will have poor effects.
F01.34=11
: the synchronous motor remains stationary during parameter self-identification.
Prior to the static self-learning of the synchronous motor, please set the motor type (F01.00)
and motor nameplate parameters (F01.01 to F01.05) correctly. Relevant parameters (F01.19 to
F01.21) of the synchronous motor and current loop parameters (F06.12 to F06.15) can be
obtained during static self-learning.
This mode is mainly used when the motor cannot rotate. It is necessary to manually enter
the counter electromotive force (F01.22).
F01.34=12
: the synchronous motor rotates during parameter self-identification.
Prior to the rotary self-learning of the synchronous motor, please set the motor type (F01.00)
and motor nameplate parameters (F01.01 to F01.05) correctly. Relevant parameters (F01.19 to
F01.21) of the synchronous motor, current loop parameters (F06.12 to F06.15) and counter
electromotive force (F01.22) can be obtained during rotary self-learning.
This mode is mainly used when the motor can rotate. However, loads should be avoided or
minimized; otherwise, self-learning will have poor effects.
