manualshive.com logo in svg

Ronde & Schwarz 1304.0004.03, Руководство пользователя

Поделиться
Скачать
Ronde & Schwarz 1304.0004.03 Скачать руководство пользователя страница 973

Remote Commands

R&S

®

FPL1000

973

User Manual 1178.3370.02 ─ 09

DIAGnostic:SERVice:VERSinfo?

This command queries information about the hardware and software components.

Return values: 

<Information>

String containing the version of hardware and software compo-
nents including the types of licenses for installed options.

Example: 

DIAG:SERV:VERS?

Queries the version information.
Response:

Usage: 

Query only

SYSTem:ERRor:CLEar:ALL

This command deletes all contents of the "System Messages" table.

Example: 

SYST:ERR:CLE:ALL

SYSTem:ERRor:CLEar:REMote

This command deletes all contents of the "Remote Errors" table.

Note: The remote error list is automatically cleared when the R&S

 

FPL1000 is shut

down.

Example: 

SYST:ERR:CLE:REM

Manual operation: 

See 

"Display Remote Errors"

 

on page 583

See 

"Clear Error List"

 

on page 589

SYSTem:ERRor:EXTended? 

<MessageType>[, <ChannelName>]

This command queries all system messages, or all messages of a defined type, dis-
played in the status bar for a specific channel setup (application).

Note:

 This command queries the strings displayed for manual operation. For remote

programs, do not define processing steps depending on these results. Instead, query
the results of the 

STATus:QUEStionable:EXTended:INFO

 status register, which

indicates whether messages of a certain type have occurred (see 

"STATus:QUEStiona-

ble:EXTended:INFO Register"

 

on page 568).

Parameters:

<MessageType>

ALL | INFO | WARNing | FATal | ERRor | MESSage

<ChannelName>

String containing the name of the channel setup.
The parameter is optional. If you omit it, the command works for
the currently active channel setup.

Return values: 

<Messages>

String containing all messages of the selected type for the speci-
fied channel setup. Each message is separated by a comma
and inserted in parentheses. If no messages are available,
empty parentheses are returned.

Configuring the R&S

 

FPL1000

Содержание 1304.0004.03





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды